HÖRMANN sectional doors consist of prefabricated panels made of hot-dip galvanized steel coated on both sides with synthetic polyester. Steel panels are reinforced with additional profiles using a special gluing technique. In the LPU 40 model, the insulation is made of polyurethane rigid foam 100% free of freon, and the stability is provided by the structure of the sandwich panels and reinforcement of the edges. Thanks to the sandwich panels and the four-sided rubber seals, the door has a very good heat transfer coefficient – 1.4 W / m2.K. Sectional doors move vertically along the guide rails and no free distances are required in front of the door and the ceiling. HÖRMANN sectional doors are also designed in accordance with European safety requirements – EN 13241-1, namely: – thanks to the patented shape of the frame,
panels and hinges with a minimum clearance of 2-4 mm, it is impossible to pinch fingers and injuries on both sides of the door; – the motor springs and ropes are duplicated, hidden and equipped with a catching device, due to which it is not possible for the door to fall (more than 30 mm) and injuries in case of spring or rope rupture; – The guide rails are completely closed and together with the wear-resistant and adjustable motor rollers, prevent the door from falling out spontaneously. The doors are protected from lifting in case of burglary, and to prevent the ingress of water, dust and leaves in the room are equipped with an upper, side and lower rubber seal. The door can be equipped with a motor for easier operation of standard HÖRMANN production.
For more information about Garage Doors Sectional Doors, you can contact our consultants.
Delivery and installation is within 1 to 8 weeks.